Delta Optical · Laser Rangefinder · OLED display
Delta Optical RFI 2000 Laser Rangefinder
7×24 optics, OLED display and a range of up to 1'830 m
Across a valley or an open pasture, guessing a distance is easy to get wrong – is the deer on the far slope at 300 or at 500 m? The Delta Optical RFI 2000 takes the guesswork out: it measures from 4.6 to 1'830 m, shows the result on a bright OLED display inside the 7× eyepiece and, when you need it, converts the reading into horizontal distance or height.
Buy the Delta Optical RFI 2000 Laser Rangefinder – know long distances in open country
The Delta Optical RFI 2000 laser rangefinder measures distances from 4.6 to 1'830 m and is a good fit for hunting, mountain tours, wildlife watching and forestry work – wherever you need reliable figures over long, open ground. You look through 7× optics with a 24 mm objective, place the aiming point on the object and read the result straight off the OLED display in the eyepiece. Besides line-of-sight distance, the device gives you the incline angle, the horizontal distance and the height difference. The 905 nm laser is rated Class 1. Browse further models in our laser rangefinder category.
Range · accuracy · measuring time
Up to 1'830 m – reach for far slopes, forest edges and wide clearings
Delta Optical specifies a measuring range of 4.6 to 1'830 m (5 to 2'000 yards) for the RFI 2000. Accuracy is graded by distance: ±0.9 m from 5 to 100 m, ±1.8 m from 100 to 200 m, ±2.7 m from 200 to 500 m and ±0.5 % of the distance beyond that. A single measurement takes 0.8 s at most. How far you can actually range depends on target and weather: results are best under a clear or lightly overcast sky, aiming at large, bright objects with an even, reflective surface.
SD, HD and VD – the right distance on steep terrain
In the mountains, your target is often well above or below you. The RFI 2000 offers three measuring modes for this: SD shows the line-of-sight distance together with the incline angle (−85° to +85°), HD the horizontal distance and VD the vertical distance – for example the height of a tree or a rock step. Height is calculated from your own position, not from the ground. You select the mode with the menu button; after 10 s without input, the laser rangefinder saves the setting and switches off.
Scan mode – several distances in one sweep
A short press of the measuring button gives you a single reading. Keep it pressed and the RFI 2000 measures continuously – for up to 8 s according to Delta Optical. That lets you sweep along a forest edge, a clearing or a slope and see the distance to each point without pressing again. Flashing diagonal lines around the aiming point show that the scan is running. If a target is too close, too far or cannot be measured, the display shows “------”.
7× optics and a bright OLED display – target and reading in one view
The optics magnify 7×, the objective is 24 mm and the lenses are multi-coated. The field of view is 115.3 m at 1'000 m (6.6°). With ±4 dioptre adjustment you set the eyepiece to your eye; eye relief is 15.5 mm. The OLED display shows the aiming point, measuring mode, distance, angle, laser activity, battery level and unit. You adjust the brightness in steps to suit the light, and switch between metres and yards in the menu.
Compact, splash-proof and powered by a CR2 – ready for long days outdoors
The housing is made of glass-fibre reinforced plastic, measures 102 × 38.5 × 71 mm and is protected against splashing water to IPX4. Delta Optical gives an operating range of −10 °C to +50 °C. The Delta Optical RFI 2000 runs on a CR2 lithium battery (3 V); at 20 °C it lasts for around 2'500 measurements according to the manual, fewer in the cold or with frequent scanning. A spare is available in our battery shop.
What the Delta Optical RFI 2000 does – and what it does not
The RFI 2000 measures distance, angle, horizontal distance and height. It is not a pair of binoculars for long observation, and it does not calculate ballistics. You reach the full 1'830 m only on well-reflecting targets in good visibility; small, dark or angled targets shorten the range. The operating range ends at −10 °C according to Delta Optical, and IPX4 protects against splashes, not submersion. The package contains the rangefinder, a case and the user manual; no spare battery is included. If you would like to observe and measure with one device, the Delta Optical Titanium HD RF 9x45 is a pair of binoculars with a built-in rangefinder. For shorter distances there is the Delta Optical RFI 1200, which measures up to 1'100 m.
Key features – Delta Optical RFI 2000 Laser Rangefinder
- 🔭 7×24 – 7× magnification, 24 mm objective, multi-coated
- 📏 4.6–1'830 m measuring range (5–2'000 yd)
- 🎯 Graded accuracy – ±0.9 m up to 100 m, ±0.5 % beyond 500 m
- ⛰️ 3 measuring modes – SD with angle, HD horizontal, VD height
- 📐 Angle −85° to +85° – for steep terrain
- 🔄 Scan mode – continuous for up to 8 s, measuring time max. 0.8 s
- 💡 OLED display – adjustable brightness, metres or yards
- 🛡️ Class 1 laser – 905 nm, to IEC 60825-1:2014
- 🔋 CR2 (3 V) – around 2'500 measurements at 20 °C
- 💧 IPX4 – 102 × 38.5 × 71 mm, −10 to +50 °C
Who is the Delta Optical RFI 2000 for?
The RFI 2000 is made for hunters who want to know how far the game is, even across valleys and wide clearings, for mountaineers and hikers, for wildlife watchers and for anyone who determines distances and heights in the forest or in the field. You will find more optics from the manufacturer on our Delta Optical brand page. Buy the Delta Optical RFI 2000 Laser Rangefinder at Swiss-Sale.ch – your Swiss specialist shop for laser rangefinders with fast shipping.
Technical Specifications – Delta Optical RFI 2000 Laser Rangefinder
| Model | Delta Optical RFI 2000 |
|---|---|
| Product type | Laser rangefinder |
| Magnification | 7× |
| Objective diameter | 24 mm |
| Field of view | 115.3 m at 1'000 m (6.6°) |
| Eye relief | 15.5 mm |
| Dioptre adjustment | ±4 dpt |
| Lens coating | Multi-coated |
| Measuring range | 4.6–1'830 m (5–2'000 yd) |
| Accuracy | 5–100 m: ±0.9 m · 100–200 m: ±1.8 m · 200–500 m: ±2.7 m · over 500 m: ±0.5 % |
| Measuring time (max.) | 0.8 s |
| Measuring modes | SD (line of sight with angle) · HD (horizontal distance) · VD (vertical distance/height) |
| Angle measurement | −85° to +85° |
| Scan mode | Continuous measurement for up to 8 s |
| Units | Metres / yards |
| Display | OLED, adjustable brightness |
| Laser | 905 nm (PLD) · Class 1 to IEC 60825-1:2014 |
| Beam divergence | vertical 2.37 mrad · horizontal 0.474 mrad |
| Battery | CR2 lithium (3 V) |
| Measurements per battery | approx. 2'500 (at 20 °C) |
| Auto power-off | after 10 s without input |
| Protection rating | IPX4 (splash-proof) |
| Operating temperature | −10 °C to +50 °C |
| Housing material | Glass-fibre reinforced plastic (PS+GF) |
| Dimensions | 102 × 38.5 × 71 mm |
| Manufacturer part no. | DO-2704 |
| Warranty | 2-year warranty |
Package Contents – Delta Optical RFI 2000 Laser Rangefinder
- 📏 Delta Optical RFI 2000 laser rangefinder
- 👜 Case for protection during transport and storage
- 📄 User manual
Not included: spare CR2 battery (3 V).
Frequently Asked Questions – Delta Optical RFI 2000 Laser Rangefinder
Here you will find answers about the Delta Optical RFI 2000 – from measuring range, accuracy and modes to battery, care, laser class and shipping within Switzerland.