Fenix · Traffic Wand · 25.4 mm compact class
Fenix AOT-S Traffic Wand White
for 25.4–26.5 mm flashlight heads
Inside a tent a raw beam dazzles more than it helps. The white wand scatters your Fenix into soft area light – the flashlight becomes a lantern.
Buy the Fenix AOT-S Traffic Wand White – turning your flashlight into a lantern
The Fenix AOT-S is the compact traffic wand of the AOT range – built for flashlights with a head diameter of 25.4 to 26.5 mm. Pushed on, it converts a focused beam into a 180 mm wand that glows all round. At 24 g it can live permanently in a car, a backpack or a duty bag without being noticed – and is there the moment you need it.
A precise fit for 25.4–26.5 mm flashlight heads
Diameter decides – why 25.4 mm is the most common head size
A traffic wand is only useful if it fits: too tight and it will not go on, too loose and the first gust of wind takes it off. The AOT-S is designed for flashlight heads from 25.4 to 26.5 mm – the standard size on tactical and EDC lights such as the Fenix PD35, PD36R or LD30. It pushes on and holds by friction, with no thread, magnet or extra parts. If in doubt, measure the outer diameter of your light head before ordering.
White as a diffuser – turning a spot into a lantern
The white version is not a signal wand but a diffuser. It breaks up the focused beam and spreads the light all around – exactly what you want in a tent, a camper van, a workshop or during a roadside repair. Instead of a hard pool of light with pitch-black shadows you get an evenly lit space without glare. Stood upright or hung overhead, your Fenix replaces the camping lantern, so there is no second light source to carry.
PC2805 polycarbonate – the material Fenix also uses for light bodies
The AOT-S is moulded from PC2805 polycarbonate by Bayer Material Science – an impact-resistant, heat-stable plastic. That matters in practice: a traffic wand regularly ends up on asphalt, gets wedged into a boot and sits directly in front of a light that produces serious waste heat in turbo mode. Polycarbonate survives both without cracking or deforming. At 180 mm long and just 24 g, the wand is barely noticeable in a pack or a glovebox.
Will it fit my light? The compatible Fenix models
The wand is designed for flashlight heads from 25.4–26.5 mm. Fenix lists models including: LD30, PD32 V2.0, PD35 V3.0, PD35R, PD36R, PD36R PRO, PD36 TAC. What ultimately counts is the measured outer diameter of the head – lights from other makers fit too, provided the diameter matches. Since Fenix occasionally changes head geometry across product revisions, a quick check with callipers is worth it on very old or very new series.
Key features – Fenix AOT-S Traffic Wand White
- 🔶 Push-on Traffic Wand – white diffuser for soft area light
- 📏 Fits flashlight heads from 25.4–26.5 mm
- 🎨 Diffuser – Soft area light
- ⚡ Fitted without tools – push on and done
- 📐 Dimensions 180 × 29.5 mm
- ⚖️ 24 g added to the light
- 🛡️ PC2805 polycarbonate (Bayer Material Science)
- 🔧 Compatible with LD30, PD32 V2.0, PD35 V3.0, PD35R, PD36R, PD36R PRO and more
- ℹ️ Flashlight not included
- 🏅 2 years Swiss statutory warranty
AOT-S, AOT-M or AOT-L – which wand fits my Fenix?
The AOT range differs in one thing only: the head diameter of the light. The AOT-S fits 25.4–26.5 mm, the AOT-M fits 34 mm and the AOT-L fits 40 mm. What counts is not the model name but the measured outer diameter of the head – callipers or a ruler will do. If you would rather have a wand that folds down in your luggage, choose the silicone AOT-03 instead. Buy the Fenix AOT-S traffic wand at Swiss-Sale.ch – your Swiss specialist shop for flashlight accessories with fast shipping.
Who is the Fenix AOT-S Traffic Wand White for?
This accessory is for anyone who wants to add a function to a Fenix flashlight they already own, without buying a second device – from the breakdown kit in the car to professional duty gear.
Technical Specifications – Fenix AOT-S Traffic Wand White
| Model | Fenix AOT-S |
|---|---|
| Type | Push-on traffic wand |
| Colour | White |
| Compatible flashlight head diameter | 25.4–26.5 mm |
| Dimensions (L×Ø) | 180 × 29.5 mm |
| Weight | 24 g |
| Material | PC2805 polycarbonate (Bayer Material Science) |
| Mounting | Push-on, no tools required · removes just as easily |
| Compatible Fenix models | LD30, PD32 V2.0, PD35 V3.0, PD35R, PD36R, PD36R PRO, PD36 TAC |
| Manufacturer part no. | AOT-SW |
| Warranty | 2 years Swiss statutory warranty |
Package Contents – Fenix AOT-S Traffic Wand White
- 🔶 Fenix AOT-S traffic wand (white)
- ℹ️ Flashlight not included
Frequently Asked Questions – Fenix AOT-S Traffic Wand White
Answers to the common questions about the Fenix AOT-S Traffic Wand White – from the right light size to fitting, material and shipping within Switzerland.