Firefield · Red Dot Sight · Aimpoint T2 footprint
Firefield RapidStrike 1x21 Red Dot Sight
3 MOA, Shake Awake and up to 80'000 h battery life
You want a dot that is already lit when you shoulder the rifle – without a battery that dies after a few weeks. The Firefield RapidStrike 1x21 red dot sight wakes up as soon as it senses motion, goes to sleep after 15 minutes of rest and runs up to 80'000 hours on its lowest setting from a single CR2032.
Buy the Firefield RapidStrike 1x21 Red Dot Sight – fast target acquisition without battery worries
The Firefield RapidStrike 1x21 red dot sight is an enclosed, tube-style red dot with a 21 mm objective for rifles with a Picatinny rail. It projects a red 3 MOA dot that you put on target quickly with both eyes open – in sport shooting, range training and anywhere speed matters at short to medium distance. Firefield specifies unlimited eye relief and a parallax setting of 100 yards (about 91 m). It ships on a high mount for Picatinny rails, and thanks to its Aimpoint T2 footprint it also fits other T2-compatible mounts. Compare more models in our red dot sights category.
Shake Awake · CR2032 · 9 brightness settings
Motion switches it on, rest saves power – up to 80'000 hours on the lowest setting
Shake Awake is what makes the RapidStrike easy to live with. After 15 minutes without movement the sight goes to sleep; pick up the rifle and the dot comes back on. According to Firefield, one CR2032 lasts up to 80'000 hours on the lowest setting, up to 45'000 hours on the middle setting and about 1'600 hours on the highest. Nine brightness levels cover real-world use: seven for daylight and dusk, two for use with night vision devices.
Side-loading battery tray – swap the cell without removing the sight
The CR2032 sits in a tray on the side of the housing. Loosen the two small screws, pull the tray straight out, insert the new cell with the positive side facing down and slide it back in. Firefield specifies 0.56 to 1.12 N·m for these screws, so snug them by hand only. The sight stays on its mount the whole time. A CR2032 comes in the box with the Firefield RapidStrike 1x21 red dot sight; spare cells are available in our battery shop.
High Picatinny mount out of the box – Aimpoint T2 footprint for other mounts
The included high mount comes pre-attached. It fits standard Picatinny rails and puts the optical centreline about 38 mm above the rail. To install, back the mounting screw off until it barely holds, set the sight flat on the rail with the objective towards the muzzle and the eyepiece towards the stock, then tighten the screw to 3.4–5.08 N·m. Prefer a different mount? Remove the four T10 Torx screws underneath and fit the sight to any Aimpoint T2-compatible mount. The housing is machined from 6061-T6 aluminium with a matte black finish.
Zeroing in 1 MOA steps – flush turrets that will not snag
Windage and elevation move 1 MOA per click, roughly 2.9 cm at 100 m, with 120 MOA of travel in each direction. The turrets sit flush with the housing so they do not catch on gear or clothing; turn them with a flat screwdriver or the supplied tool. Firefield recommends rough alignment through the bore or with a laser boresighter, followed by three-shot groups on a shooting range. Clear flip-up covers protect both lenses – and because they are transparent, the sight remains usable even with the covers closed.
What the RapidStrike 1x21 does – and what it does not
The RapidStrike is a non-magnifying (1x) red dot sight with a single 3 MOA red dot. It has no alternative reticles, no green illumination and no laser. The housing is IP67 rated against dust and temporary immersion, nitrogen-filled and shockproof. In the box you get the high mount, a CR2032, clear flip-up covers, a 2 mm hex key, a Torx key and a lens cloth. A low mount, spare batteries, a torque wrench and the rifle itself are not included.
Key features – Firefield RapidStrike 1x21 Red Dot Sight
- 🔴 3 MOA red dot – 1x, 21 mm objective, multi-coated optics
- 📳 Shake Awake – sleeps after 15 min, wakes on motion
- 🔋 CR2032 – 1'600 h (high) · 45'000 h (mid) · 80'000 h (low)
- 🔆 9 brightness settings – 7 for day and dusk, 2 night vision compatible
- 🎯 1 MOA per click – 120 MOA windage and elevation, flush turrets
- 👁️ Unlimited eye relief – parallax set at 100 yards (approx. 91 m)
- 🔧 High Picatinny mount – Aimpoint T2 footprint for other mounts
- 💧 IP67 – nitrogen-filled, fogproof, shockproof
- 🛡️ 6061-T6 aluminium – matte black, clear flip-up covers
- ⚖️ 144 g with mount – 69 × 36 × 64 mm · 115 g without mount
Who is the Firefield RapidStrike 1x21 for?
For shooters who want a rugged, enclosed red dot with long battery life and no need to switch it on and off every time: sport shooters at the range, rifle training sessions, owners of rifles with a Picatinny rail and anyone who already runs an Aimpoint T2-compatible mount. Buy the Firefield RapidStrike 1x21 red dot sight at Swiss-Sale.ch – your Swiss specialist shop for red dot sights and sighting optics with fast shipping.
Technical Specifications – Firefield RapidStrike 1x21 Red Dot Sight
| Model | Firefield RapidStrike Red Dot 1x21 |
|---|---|
| Product type | Red dot sight, enclosed (tube) |
| Magnification | 1x |
| Objective diameter | 21 mm |
| Reticle | 3 MOA dot |
| Reticle colour | Red |
| Brightness settings | 9 (7 daylight · 2 night vision compatible) |
| Shake Awake | Yes, sleeps after 15 min without motion |
| Adjustment per click | 1 MOA |
| Adjustment range | 120 MOA windage · 120 MOA elevation |
| Parallax setting | 100 yd (approx. 91 m) |
| Eye relief | Unlimited |
| Lens coating | Multi-coated |
| Battery | CR2032 (3 V), side-loading tray |
| Runtime (max.) | up to 80'000 h (lowest setting) · 45'000 h (middle) · 1'600 h (highest) |
| Protection rating | IP67, nitrogen-filled, fogproof, shockproof |
| Mount / footprint | High Picatinny mount (included) · Aimpoint T2 footprint |
| Optical centreline above rail | approx. 38 mm (high mount) |
| Housing material | 6061-T6 aluminium |
| Colour | Matte black |
| Dimensions with mount | 69 × 36 × 64 mm |
| Dimensions without mount | 69 × 36 × 42 mm |
| Weight | 144 g with mount · 115 g without mount |
| EAN | 810119011800 |
| Manufacturer part no. | FF26035 |
| Warranty | 2-year warranty |
Package Contents – Firefield RapidStrike 1x21 Red Dot Sight
- 🔴 Firefield RapidStrike 1x21 red dot sight
- 🔧 High mount for Picatinny rails (pre-installed)
- 🔋 CR2032 battery
- 🛡️ Clear flip-up lens covers for objective and eyepiece
- 🔩 Hex key 2 mm
- 🪛 Torx key
- 🧽 Lens cloth
Not included: low mount, spare battery, torque wrench, firearm.
Frequently Asked Questions – Firefield RapidStrike 1x21 Red Dot Sight
Answers about the Firefield RapidStrike 1x21 – from reticle, Shake Awake and battery life to mounting, zeroing and shipping within Switzerland.
What reticle does the Firefield RapidStrike 1x21 have?
How big and how heavy is the Firefield RapidStrike 1x21?
What is the Firefield RapidStrike 1x21 suitable for?
How does Shake Awake work on the Firefield RapidStrike 1x21?
How long does the battery last in the Firefield RapidStrike 1x21?
How do I look after the Firefield RapidStrike 1x21?
How do I operate and adjust the Firefield RapidStrike 1x21?
Does the Firefield RapidStrike 1x21 fit other mounts?
What warranty applies to the Firefield RapidStrike 1x21?
How fast does Swiss-Sale.ch ship the Firefield RapidStrike 1x21?
Why buy the Firefield RapidStrike 1x21 from Swiss-Sale.ch?
What should I keep in mind when mounting and using the Firefield RapidStrike 1x21?
Official Firefield user manual for the RapidStrike 1x21: mounting, operation and care. Language: English.
Firefield RapidStrike 1x21 – user manual (PDF)