Maglite® · Bulb · Mag-Num Star® II Xenon
Maglite Mag-Num Star II Xenon Bulb 3C/3D
Xenon bulb · for Maglite® 3C / 3D-cell · Mag-Num Star® II · Made in Germany
Bulb in your Maglite® 3C or 3D burnt out? The Maglite Mag-Num Star II Xenon Bulb 3C/3D is the OEM replacement with the proven Mag-Num Star® II Xenon technology – swapped in seconds.
Buy the Maglite Mag-Num Star II Xenon Bulb 3C/3D – the original bulb for Maglite® 3C and 3D-cell flashlights
The Maglite Mag-Num Star II Xenon Bulb 3C/3D is the official Maglite® replacement bulb for the classic 3C- and 3D-cell torches. It uses the patented Mag-Num Star® II Xenon technology and delivers the typical bright, slightly warm-white light that the classic Maglite® torches have been known for over decades. When your existing bulb has burnt out after years of service, the new one slots into the reflector module within seconds – no tools needed.
Important: the Maglite Mag-Num Star II Xenon Bulb 3C/3D fits exclusively in Maglite® torches with 3C- or 3D-cell configuration (three C- or D-cells). For 2-cell, 4-cell, 5-cell and 6-cell models there are dedicated Mag-Num Star® II Xenon bulbs with matching voltage. The bulb ships in a single-piece package – no reflector, no end cap, just the bulb as a wear part for direct swap in the reflector module of your existing torch.
OEM replacement · Made in Germany
Xenon technology from Bavarian production – why the original is worth it
For Maglite® torches there is a wide selection of after-market bulbs. The Maglite Mag-Num Star II Xenon Bulb 3C/3D is, however, the official Mag-Num Star® II original from Maglite®'s own facility in Bavaria. Benefits: exact-fit base without wobble or contact issues, tuned voltage for 3-cell operation (no burn-out from wrong volt rating), even brightness over lifespan and a beam pattern tuned to the Maglite® reflector. The result: not a diffuse cone but the characteristic focused Maglite® spot the classic torches are famous for.
Which Maglite® models is the Maglite Mag-Num Star II Xenon Bulb 3C/3D made for?
The Maglite Mag-Num Star II Xenon Bulb 3C/3D fits all classic Maglite® torches with 3C- or 3D-cell configuration – the mid-size classics running on three C-cells (slightly slimmer) or three D-cells (the largest classic). If your torch has been with you since the 80s, 90s or 2000s and runs on three batteries, this bulb is the right spare. For LED versions (ML, XL series) and the smaller Mini Maglite® / Solitaire® it does NOT fit – dedicated replacement bulbs exist for those.
What is Mag-Num Star® II Xenon – and why is it a good choice?
Maglite® has used a Xenon bulb as the standard replacement in their classic torches for decades. Compared to krypton or basic halogen bulbs, Xenon delivers brighter and slightly whiter light at the same current draw. The Mag-Num Star® II is the second generation of this design and visibly brighter than the original first-generation bulbs (typically 20–50 % depending on the comparison). It is still manufactured in Bavaria in Maglite®'s own facility – a rarity for an international US brand product.
Replacing the Maglite Mag-Num Star II Xenon Bulb 3C/3D in 3 steps
1.) Unscrew the end cap of your Maglite® and remove the three C- or D-cells. 2.) Unscrew the reflector head and take out the reflector module – the old bulb sits centrally on the base. 3.) Carefully pull the old bulb out, insert the new Maglite Mag-Num Star II Xenon Bulb 3C/3D and refit the reflector. Re-insert the batteries, close the end cap, test the torch. Important: do not touch the bulb glass with bare fingers – skin oils on the glass shorten the lifespan. Use a clean cloth or the original packaging as a holder.
Key features – Maglite Mag-Num Star II Xenon Bulb 3C/3D
- 💡 Mag-Num Star® II Xenon bulb
- 🔋 Compatible with Maglite® 3C- and 3D-cell torches
- 🔄 OEM replacement with exact-fit base
- 🌞 Bright, slightly warm-white Xenon light
- 🔧 Tool-free swap directly in the reflector module
- 💪 Bi-pin construction · stable & corrosion-resistant
- 📦 Ships as a single bulb (1 per pack)
- 🇩🇪 Made in Germany · Maglite® facility in Bavaria
- 🏅 Original Maglite® quality
- ♻️ Direct 1:1 replacement – old torch back in service
- 🏅 2-year Swiss statutory warranty
Who is it for?
The Maglite Mag-Num Star II Xenon Bulb 3C/3D is for all owners of a Maglite® 3C- or 3D-cell torch whose original bulb is fatigued or burnt out after years of use – buy now at Swiss-Sale.ch, your Swiss specialist shop for Maglite® OEM parts with fast shipping.
Technical Specifications – Maglite Mag-Num Star II Xenon Bulb 3C/3D
| Model | Maglite Mag-Num Star II Xenon Bulb 3C/3D |
|---|---|
| Brand | Maglite® |
| Type | Replacement bulb (Xenon) |
| Series | Mag-Num Star® II Xenon |
| Bulb type | Xenon (incandescent with xenon fill) |
| Base | Bi-pin (Maglite® Mag-Num Star® II) |
| Compatibility | Maglite® 3C-cell & 3D-cell torches |
| Not compatible with | Maglite® LED models (ML, XL), Mini Maglite®, Solitaire® |
| Light colour | Slightly warm-white |
| Pack form | Single bulb (1×) in blister/box |
| Made in | Germany (Bavaria) |
| EAN | 0 38739 10718 9 |
| Manufacturer part no. | LMXA301U · 107-000-739 |
| Warranty | 2-year Swiss statutory warranty |
Package Contents – Maglite Mag-Num Star II Xenon Bulb 3C/3D
- 💡 Maglite Mag-Num Star II Xenon Bulb 3C/3D Xenon replacement bulb for Maglite® 3C/3D-cell (1×)
Frequently Asked Questions – Maglite Mag-Num Star II Xenon Bulb 3C/3D
Here you will find answers about the Maglite Mag-Num Star II Xenon Bulb 3C/3D – from compatibility and brightness to swap, care and Swiss shipping.