Your red dot sight does not fit the rail, your pistol has a different footprint or your shotgun has no rail at all? Find out which mount, adapter plate or base you need – and which accessories go with it.
Picatinny, Weaver or 11 mm dovetail – the rail decides the mount
Docter/Noblex, RMR, RMSc, ACRO: direct mounting or adapter plate
A lever for quick removal or screwed down for permanent use
of Sightmark and Delta Optical – warranty handled by us
Red dot mounts connect the sight to the firearm – and decide whether it sits firmly, at the right height and whether it can be removed quickly when needed. Which mount you need depends on two questions: what does your firearm offer – a rail, an optics-ready cut or nothing at all? And which interface does your sight have on its underside – its own rail mount or a footprint, i.e. a defined hole pattern?
This category covers everything to do with mounting and accessories: rail mounts for Picatinny, Weaver and the 11 mm dovetail rail, adapter plates, shotgun mounts as well as battery packs and skins. You will find the sights themselves under red dot sights. The same principles apply to riflescopes and weapon lights: first clarify the rail, then choose the mount.
The Picatinny rail is standardised under the US military standard MIL-STD-1913: cross slots at fixed intervals into which the recoil bolt of the mount engages. Many red dot mounts are built for the Picatinny rail. Sightmark, for example, states that the Ultra Shot M-Spec is designed to be mounted on Picatinny rails only.
The Weaver rail has a similar profile, but the width and spacing of its cross slots are not uniformly standardised; the slots are usually narrower than on a Picatinny rail. Mounts with a Weaver base therefore usually also fit a Picatinny rail, but not always the other way round. Delta Optical supplies its MiniDot HD sights with a mount for the 22 mm rail (Weaver). Whether a mount covers both rails is stated in its manual.
The 11 mm dovetail rail has no cross slots; the mount is clamped from the side. It is common on air rifles and small-bore rifles, for example. For the MultiDot HD, Delta Optical lists a separately available reducer for the 11 mm rail, and for the MiniDot II and MiniDot III an adjustable mounting base for rails from 6 to 14 mm wide.
Compact red dot sights have a defined hole pattern on their underside, the footprint. Common ones include Docter/Noblex, RMR, RMSc and ACRO. Sightmark specifies the Docter/Noblex standard for the Mini Shot M-Spec M1: on pistols with a matching optics cut the sight fits without an adapter plate, for other footprints you need an adapter plate and suitable screws. Delta Optical states the C-More footprint for the MiniDot HD and offers its own mounting bases, including MT-5102 for Glock 9 mm, MT-5100 for Colt 1911 and MT-5103 for Beretta 92. Such bases are model-specific: check the exact pistol model and, where stated, the calibre.
A quick detach (QD) mount clamps onto the rail with a lever. You remove the sight without tools, for example for transport or to use it on a second firearm. Sightmark calls its version LQD (Locking Quick Detach): the lever can also be locked. A fixed mount is tightened with screws or nuts and stays on the firearm; it has no moving parts. The manufacturer specifies in the manual how tightly to tighten the screws.
How high the sight sits above the rail determines whether you see it cleanly with a natural head position when shouldering. Sightmark supplies the Mini Shot M-Spec M1 V2 with a low Picatinny mount (around 20 mm) and a high one (around 38 mm): the low one for bolt-action rifles, lever-action rifles and shotguns, the high one for rifles with a flat-top receiver. A riser is a spacer that raises the sight.
With the Quick Detach Battery Pack (10'000 mAh) and the Quick Detach Mini Battery Pack (6'000 mAh), Sightmark offers external rechargeable batteries that clamp onto a Picatinny rail without tools and power a device via a USB cable. The packs are intended for optics with a USB power input; a classic red dot sight with a coin cell does not need them. Your device's manual tells you whether it can be powered via USB.
Sightmark offers skins in MultiCam, MultiCam Black, Flecktarn, Ranger Green and Coyote Brown, each made for specific models: Ultra Shot R-Spec and A-Spec, Ultra Shot M-Spec LQD and FMS as well as the T-3, T-5 and XTM-3 magnifiers. For the MTS Mini Solar there is a skin in Blaze Orange. A skin only fits the model it is made for – check the exact name of your sight.
Many shotguns have no mounting rail. For them there are fixed shotgun mounts that take a sight with the Docter/Noblex footprint. If the shotgun has a rail, Sightmark recommends the low mount for the Mini Shot M-Spec M1 V2.
For the Karabiner 31 (K31) there are sight housing inserts onto which a compact red dot sight can be mounted, such as a Sightmark Mini Shot M-Spec or a Noblex sight. For Blaser rifles there are quick-release mounts that take such a sight. Both solutions are tailored to specific sights – check before buying whether your sight fits, or ask us.
| Interface | How to recognise it | Typical mounting solution |
|---|---|---|
| Picatinny rail | Standardised cross slots at fixed intervals (MIL-STD-1913) | Clamp or quick detach mount with recoil bolt |
| Weaver rail (22 mm) | Similar profile, slots usually narrower, spacing not uniform | Weaver mount, usually also fits Picatinny |
| 11 mm dovetail rail | Dovetail without cross slots | Reducer or adjustable base (e.g. 6–14 mm) |
| Footprint on the sight | Hole pattern on the underside (Docter/Noblex, RMR, RMSc, ACRO, C-More) | Directly on a matching cut or with an adapter plate |
| Special cases | Shotgun without a rail, K31, Blaser | Shotgun mount, sight housing insert or quick-release mount, model-specific |
Swiss-Sale.ch is the official Swiss retailer of Sightmark and Delta Optical. We advise you on which red dot mount suits your rail, your footprint and your firearm – so that sight, mount and firearm match before you order. Shipped from Switzerland, no customs; warranty claims are handled by us.
Both rails have a similar profile with cross slots. The Picatinny rail is standardised under MIL-STD-1913, with defined slot width and spacing. On the Weaver rail the slots are usually narrower and not uniformly spaced. Weaver mounts therefore usually also fit a Picatinny rail, but Picatinny mounts do not always fit a Weaver rail. The information in the manual of the mount is decisive.
The footprint is the hole pattern on the underside of a compact red dot sight. It determines which optics cut or adapter plate the sight fits. Common footprints include Docter/Noblex, RMR, RMSc and ACRO. If the footprint of the sight matches the optics cut of the pistol, you mount it directly; otherwise you need an adapter plate.
Yes, with a suitable mount. Delta Optical, for example, offers an adjustable base for rails 6 to 14 mm wide for the MiniDot II and MiniDot III, and a reducer for the 11 mm rail for the MultiDot HD. Sights with a Picatinny-only mount do not fit the 11 mm rail directly.
That depends on how you use it. With a quick detach mount you remove the sight without tools, for example for transport or for a second firearm; on the Sightmark LQD mount the lever can also be locked. A fixed mount is screwed down and stays on the firearm. Check the point of impact every time you remove and refit the sight.
Yes. For the K31 there are sight housing inserts, and for Blaser rifles quick-release mounts, that take a compact red dot sight such as a Sightmark Mini Shot M-Spec or a Noblex sight. These solutions are tailored to specific sights. So check before buying whether your sight fits, or ask us.
Picatinny, Weaver, 11 mm and footprints – advice from Swiss-Sale.ch, shipped from Switzerland, no customs.