Nitecore MH10 V2 Flashlight | 1,200 Lumens | USB-C | IP68

Nitecore · Flashlight · EDC

Nitecore MH10 V2
USB-C 21700 EDC Flashlight

1,200 Lumens. IP68. Direct USB-C Charging – the smart EDC companion for outdoor, hunting and everyday carry

The Next Generation of EDC Flashlights – Compact, Powerful, Always Ready

A reliable flashlight is essential equipment for every outdoor enthusiast – whether hunting, camping or for everyday carry. The Nitecore MH10 V2 sets new standards: with a peak output of 1,200 lumens, a beam range of 202 metres and full IP68 protection, the lightweight 77.5 g aero-aluminium body packs real professional technology. The integrated USB-C charging port eliminates the need for a separate charger, and with the included 21700 lithium-ion battery (4,000 mAh) the light is ready to use straight from the box. The patented ATR thermal management system and dual-fuel compatibility make the Nitecore MH10 V2 the uncompromising choice for those who depend on their light.

CREE XP-L2 V6 LED with PDOT Optics – Precision at 202 Metres

The Nitecore MH10 V2 uses the proven CREE XP-L2 V6 high-performance LED in combination with an SMO reflector for a focused, even beam. With 10,200 candela light intensity and a range of 202 metres, it excels on the hunting stand, on mountain trails or in open terrain. The double-sided scratch-resistant optical lenses – developed using the Precision Digital Optics Technology (PDOT) principle – maximise light transmission and permanently protect the optics from wear, even after hundreds of uses.

Dual Fuel – Compatible with 21700, 18650 and CR123

Flexibility in power supply is not a luxury in the outdoors – it is a necessity. The MH10 V2 was designed as a dual-fuel light and accepts not only the included 21700 lithium-ion battery (NL2140, 4,000 mAh) but also, thanks to the included adapter, standard 18650 batteries as well as CR123 and RCR123 cells. Whether travelling, abroad or in an emergency – the MH10 V2 can always be powered by an available energy source. In the energy-saving ULTRALOW mode, it achieves an impressive runtime of 1,500 hours.

Direct USB-C Charging – Power Anywhere, Without an Extra Charger

The integrated USB-C charging port on the Nitecore MH10 V2 allows direct charging of the light – no separate charger, no extra luggage. Whether a powerbank on the belt, a USB adapter in the car or a mains adapter at home: wherever USB-C is available, the light can be recharged. The included USB-C cable is ready to use immediately. The built-in electronic reverse polarity protection prevents damage from incorrectly inserted batteries. The precise power indicator with ±0.1 V accuracy can be read directly on the light – no unpleasant surprises from a flat battery at a critical moment.

IP68 and HA III Hard Anodising – Built for the Harshest Conditions

The housing of the Nitecore MH10 V2 is made from aero-grade aluminium with military HA III hard anodising – the same surface treatment used in industrial and military applications. The IP68 certification guarantees complete dustproofing and waterproofing to a depth of 2 metres – rain, slush and an accidental fall into a stream are no problem. Combined with 1 metre impact resistance, the MH10 V2 is safe even in rough handling in the field. The tailstand function also allows the light to be placed upright and used as a freestanding lamp – practical when camping, cooking at the campfire or in a first-aid situation.

4 Brightness Levels and 3 Special Modes – Fast and Intuitive via Metal Switch

The Nitecore MH10 V2 is designed for rapid response: a durable metal switch on the side of the housing controls all four brightness levels – from the energy-saving ULTRALOW mode to the maximum output of 1,200 lumens. Three special modes round out the range, including a STROBE mode with variable frequencies for a strong disorienting effect, as used in emergency situations or tactical environments. The integrated battery level and voltage indicator (±0.1 V) provides complete control over the power status – at any time and during any operation.

Key features – Nitecore MH10 V2

• 💡 1,200 lumen peak output, 202 m beam distance – CREE XP-L2 V6 LED with SMO reflector and PDOT optics
• 🌡️ ATR thermal regulation (patent) – automatic output adjustment for stable long-term illumination
• 🔋 Dual Fuel: NL2140 21700 (4,000 mAh) or 18650/CR123 – maximum battery flexibility
• 🔌 USB-C charging directly in the torch – no extra charger, runtime up to 1,500 h (ULTRALOW)
• 💧 IP68 (permanent 2 m protection), HA III hard anodizing, 1 m drop-tested
• ⚖️ 77.5 g – ultralight for daily EDC carry
• 📊 Built-in voltage indicator (±0.1 V) – full control over battery status at all times
• 🎛️ Metal switch, 4 brightness levels + 3 special modes (Strobe, SOS, Beacon)
• 🏕️ Tail-stand capability – stands securely as a candle lantern
• 🏆 5-year Nitecore manufacturer warranty

Who is the Nitecore MH10 V2 for?

The Nitecore MH10 V2 is aimed at anyone looking for a high-performance, reliable flashlight in EDC format – with professional equipment and no compromises. Whether on the hunting stand, on multi-day tours, in rescue operations or in everyday use: this light impresses with well-engineered technology, durable construction and smart design. The included tactical holster NTH10 also allows secure attachment to the body or backpack – within reach whenever light is needed.