Nitecore · Weapon Light · Picatinny
Nitecore NPL30 Weapon Light
1'200 lumens from 4 LEDs, 113 m throw, 2× CR123A
At dusk or in a dark room you need to identify a target with certainty before you act – and you want both hands on the firearm while you do it. The Nitecore NPL30 weapon light mounts directly on the Picatinny rail, puts out 1'200 lumens from four CREE LEDs and can be operated with the thumb of either hand.
Buy the Nitecore NPL30 Weapon Light – bright, even light for any Picatinny-railed firearm
The Nitecore NPL30 weapon light is a universal weapon light for firearms with a Picatinny rail. Nitecore calls it a «High Performance Universal Weapon Light»: four CREE XP-G3 LEDs deliver 1'200 lumens, and a TIR lens shapes them into a smooth, soft beam with a peak intensity of 3'300 cd and a throw of 113 m. The light runs on two CR123A lithium batteries, which are included, for up to 1 h 45 min. The hard-anodised (HA III) aluminium alloy housing measures 81.5 × 37 × 35.6 mm and weighs 97 g without batteries. Browse more models in our range of Nitecore weapon lights.
Four LEDs · TIR optic
1'200 lumens in a soft beam – light up the room, not just a spot
Instead of a single LED behind a reflector, the Nitecore NPL30 uses four CREE XP-G3 LEDs behind a TIR (Total Internal Reflection) lens. The result is an evenly spread beam: a bright centre with 3'300 cd for 113 m of throw, surrounded by a wide spill in which you can make out door frames, obstacles and movement at close range. A constant-current circuit keeps the output stable, while ATR (Advanced Temperature Regulation) adjusts the output to the operating conditions and the ambient temperature.
Two rear switches – identical for left- and right-handed shooters
At the rear of the Nitecore NPL30 there is one switch on each side, and both do exactly the same thing. You can reach them with the thumb of your shooting hand or with a finger of your support hand without changing your grip. Press and hold for momentary light; a short press turns constant-on light on or off; a triple press activates strobe, whether the light is on or off. The strobe changes its frequency at random and is intended for signalling and disorientation. Every mode runs at the full 1'200 lumens – the NPL30 has no lower output level.
Picatinny mounting – stopper in the recoil groove, tighten the screw
The NPL30 is designed for firearms with a Picatinny rail. To mount it, loosen the mounting screw, place the stopper in one of the rail's recoil grooves and tighten the screw clockwise. Nitecore states that the firearm must be clear and unloaded whenever you mount or remove the light or change its batteries, and that the light should be taken off for firearm maintenance. Nitecore does not list specific firearm models – what matters is the Picatinny rail on your firearm. For an overview of other models, see our weapon lights category.
CR123A or RCR123A – batteries, runtime and battery changes
According to Nitecore, the NPL30 accepts two CR123A lithium batteries (3 V) or two rechargeable RCR123A cells (3.6/3.7 V). On CR123A (1'600 mAh) it runs for 1 h 45 min at 1'200 lumens; on RCR123A (650 mAh) for 45 min. To open the battery compartment, lift the cap or press the screw on the back; remove the insulation film before first use. Electronic reverse polarity and short-circuit protection safeguard the electronics. If you store the light for a longer period, take the batteries out. Spare cells are available in our battery shop and among our Nitecore rechargeable batteries.
What the Nitecore NPL30 does – and what it doesn't
The NPL30 is a bright, compact white-light weapon light with four LEDs, a rugged aluminium housing and simple controls. It has no laser, no infrared LED, no low mode and no built-in battery with USB charging. The housing is rated IP66, meaning it is dust-tight and protected against powerful water jets; Nitecore gives no rating for submersion. Two CR123A batteries are included; not included are rechargeable RCR123A cells and a charger, a holster, a remote switch and, of course, the Picatinny-railed firearm.
Key features – Nitecore NPL30 Weapon Light
- 💡 1'200 lumens – 4× CREE XP-G3 LED with TIR lens
- 📡 113 m throw – 3'300 cd peak beam intensity
- 👐 Two rear switches – same function on both sides
- ⚡ Momentary, constant-on, strobe – strobe with random frequency
- 🔋 2× CR123A – included, RCR123A cells also supported
- ⏱️ 1 h 45 min – on CR123A, 45 min on RCR123A
- 🔩 Picatinny mount – stopper and mounting screw
- 🌡️ ATR and protection circuit – reverse polarity and short-circuit protection
- 💧 IP66 – dust-tight, water-jet protected, 1 m impact resistant
- ⚖️ 97 g – without batteries, 130 g with batteries, HA III aluminium
Who is the Nitecore NPL30 for?
The NPL30 is aimed at sport shooters, security services and anyone looking for a bright, easy-to-use white light for a firearm with a Picatinny rail. If you train in low light or practise in dark rooms, you will benefit from the wide beam. For hunting, Switzerland has strict cantonal rules on artificial light sources – check with your cantonal hunting authority before using it. Buy the Nitecore NPL30 Weapon Light at Swiss-Sale.ch – your Swiss specialist shop for weapon lights with fast shipping.
Technical Specifications – Nitecore NPL30 Weapon Light
| Model | Nitecore NPL30 |
|---|---|
| Brand | Nitecore |
| Product type | Weapon light (Universal Weapon Light) |
| Light | |
| Light source | 4× CREE XP-G3 LED |
| Optic | TIR lens (Total Internal Reflection) |
| Light output (max.) | 1'200 lm |
| Beam distance (max.) | 113 m |
| Peak intensity | 3'300 cd |
| Modes | Momentary · constant-on (1'200 lm) · strobe (1'200 lm, random frequency) |
| Controls | 2 rear switches, same function on both sides |
| Temperature regulation | ATR (Advanced Temperature Regulation) |
| Power | |
| Batteries | 2× CR123A (3 V, included) or 2× RCR123A (3.6/3.7 V) |
| Runtime (max.) | up to 1 h 45 min (CR123A) · up to 45 min (RCR123A) |
| Protection circuit | Electronic reverse polarity protection · short-circuit protection · constant-current circuit |
| Housing and mounting | |
| Mount | Picatinny rail (stopper and mounting screw) |
| Housing material | Aluminium alloy, hard-anodised (HA III) |
| Protection rating | IP66 |
| Drop resistance | 1 m |
| Dimensions | 81.5 × 37 × 35.6 mm |
| Weight | 97 g (without batteries) · 130 g (with batteries) |
| Colour | Black |
| Identification | |
| EAN | 6952506404148 |
| Warranty | 2-year warranty |
Package Contents – Nitecore NPL30 Weapon Light
- 🔦 Nitecore NPL30 weapon light with Picatinny mount
- 🔋 CR123A lithium batteries (2×)
- 📄 User manual (multilingual, incl. English)
Not included: rechargeable RCR123A cells and charger, holster, remote switch, firearm with Picatinny rail.
Frequently Asked Questions – Nitecore NPL30 Weapon Light
Answers about the Nitecore NPL30 – from output, batteries and runtime to mounting and controls, plus warranty, shipping and safe use.