Olight · Weapon Light · Valkyrie series
Olight PL-3S Valkyrie Black Weapon Light
1'000 lumens or 200 lumens – compact, 119 g, up to 5 h 20 min of light
Full power is not always the right choice: in tight rooms or in front of bright walls, too much light bounces straight back at you, while outdoors you want every lumen you can get. A weapon light with only one level forces a compromise. The Olight PL-3S Valkyrie weapon light gives you two – 1'000 lumens for reach and 200 lumens for short distances and long runtime – in a compact body for Picatinny and Glock rails.
Buy the Olight PL-3S Valkyrie weapon light – two outputs for close range and distance
The Olight PL-3S Valkyrie weapon light is a compact LED light for pistols and other firearms with a Picatinny (MIL-STD-1913) or Glock rail. In High mode it delivers 1'000 lumens with a peak intensity of 10'000 cd and a beam distance of 200 m. For short distances and long sessions you switch to 200 lumens, which runs for up to 320 minutes. Two tail switches make operation identical for left- and right-handed shooters, and an adjustable key-block adapts the light to different rails. Two CR123A batteries are already installed. More models from the brand are listed in our Olight weapon lights.
Two levels · 1'000 and 200 lumens
High or Low – the right brightness for each situation
With 1'000 lumens and 10'000 cd, the PL-3S Valkyrie reaches out to 200 m outdoors. Indoors, at close range or in front of bright surfaces, that much light can reflect back – so a double press drops it to 200 lumens. Low also saves your batteries, lasting up to 320 minutes, or about 5 hours 20 minutes. Another double press takes you back to High. You decide whether reach or endurance matters more at that moment.
Key-block and setscrew – secure mounting on Picatinny and Glock rails
The PL-3S rail mount has an adjustable key-block that lets you set the position of the light on the rail and adapt it to different rail profiles. Olight supplies two rail adapters: one for Picatinny (MIL-STD-1913) rails and a GL adapter for Glock rails. A strong setscrew holds the light in place and allows easy one-handed mounting and removal. Before ordering, check that your firearm has a suitable rail and that your holster is made for a gun with a light attached. You will find more lights for rail and holster in our weapon lights category.
Two tail switches – constant on, momentary, level change and strobe
There is one switch on each side at the rear, and both work the same way. A quick press turns the light on and off. Press and hold, and the PL-3S stays lit only as long as you hold. With the light on, a double press switches between 1'000 and 200 lumens. Press both switches together to start the strobe, intended for signalling and disorientation; it keeps running after you let go until you press a switch again. You operate the light with one finger, whichever hand you shoot with.
Two CR123A batteries – runtimes as measured by Olight
The PL-3S Valkyrie runs on two 1'600 mAh CR123A lithium batteries, which Olight installs at the factory – before first use you only remove the insulating film from the battery compartment. In High mode it runs for about 7 minutes at 1'000 lumens, then steps down to 450 lumens for about 110 minutes, followed by around 20 minutes at 200 lumens – roughly 137 minutes in total. Low mode lasts up to 320 minutes at 200 lumens. Spare cells belong in every kit; you will find suitable ones in our battery shop.
IPX6 and 1 m drop rating – compact and weatherproof
The PL-3S is rated IPX6 against powerful water jets and survives drops from 1 m. At 81 mm long, 36.6 mm wide and 32.5 mm high it is short and slim, and it weighs 119 g with batteries. That makes it a good fit for handguns, where every gram and millimetre counts in the holster. Browse more gear from the manufacturer on our Olight brand page.
What the PL-3S Valkyrie does – and what it does not
The PL-3S is a white-light-only weapon light with two output levels and strobe. It has no laser or infrared, and no built-in rechargeable battery or charging port – it runs on CR123A batteries. If maximum reach is your priority, Olight offers the PL Turbo Valkyrie with 66'300 cd and 515 m, which in turn has only one level. A holster, spare batteries and the firearm are not included. The PL-3S does not replace a handheld torch or headlamp either: a weapon light stays on the gun, and for searching you use a separate light.
Key features – Olight PL-3S Valkyrie weapon light
- 💡 1'000 lumens – High mode, then 450 and 200 lumens
- 🌗 200 lumens – Low mode with up to 320 minutes runtime
- 🎯 10'000 cd / 200 m – peak intensity and beam distance
- ⚡ Strobe – press both switches together
- 👐 Dual tail switches – constant on, momentary on, double press to change level
- 🛤️ Picatinny (MIL-STD-1913) and Glock – two rail adapters included
- 🔧 Adjustable key-block – setscrew, one-handed mounting
- 🔋 2× CR123A 1'600 mAh – included
- 💧 IPX6, 1 m drop – weatherproof and drop resistant
- ⚖️ 119 g – with batteries, 81 × 36.6 × 32.5 mm
- 🏅 2-year warranty – handled by Swiss-Sale.ch in Switzerland
Who is the Olight PL-3S Valkyrie for?
Sport shooters who also train with their pistol at dusk, police and security services that want to choose between full output and a dimmer light, and anyone equipping a handgun with a Picatinny or Glock rail for personal safety. If you are looking for a compact light with long runtime on Low, the PL-3S is a good match. Buy the Olight PL-3S Valkyrie weapon light at Swiss-Sale.ch – your Swiss specialist shop for weapon lights and flashlights with fast shipping.
Technical Specifications – Olight PL-3S Valkyrie Weapon Light
| Model | Olight PL-3S Valkyrie |
|---|---|
| Brand | Olight |
| Product type | Weapon light |
| Colour | Black |
| Light | |
| Light source | LED, cool white |
| Light output (max.) | 1'000 lm (High) |
| Low mode | 200 lm |
| Peak intensity | 10'000 cd |
| Beam distance (max.) | 200 m |
| Runtime (max.) | up to 320 min (Low, 200 lm) |
| Runtime High | ~137 min (7 min 1'000 lm + 110 min 450 lm + 20 min 200 lm) |
| Special mode | Strobe |
| Operation | |
| Switches | 2 tail switches, ambidextrous |
| Modes | Constant on · Momentary on · High/Low by double press · Strobe |
| Mounting | |
| Rails | Picatinny (MIL-STD-1913) · Glock |
| Adapters | Picatinny adapter and GL adapter included |
| Attachment | Adjustable key-block with setscrew, one-handed mounting |
| Power | |
| Batteries | 2 × CR123A, 1'600 mAh (included) |
| Body | |
| Protection rating | IPX6 |
| Drop resistance | 1 m |
| Dimensions (L × W × H) | 81 × 36.6 × 32.5 mm |
| Weight | 119 g with batteries |
| Identification | |
| EAN | 6975498002178 |
| Warranty | 2-year warranty |
Package Contents – Olight PL-3S Valkyrie Weapon Light
- 🔦 Olight PL-3S Valkyrie weapon light, black (with rail adapter fitted)
- 🔋 CR123A batteries 1'600 mAh (2×, installed)
- 🛤️ GL adapter for Glock rails, with screw
- 🔧 Hex keys H2.5 and H1.5
- 📄 User manual
Not included: firearm, holster, spare batteries. The PL-3S has no built-in rechargeable battery and no charging cable; it runs on CR123A batteries.
Frequently Asked Questions – Olight PL-3S Valkyrie Weapon Light
Answers about the Olight PL-3S Valkyrie – from its two output levels and runtimes to mounting on Picatinny and Glock rails, the difference from the PL Turbo, shipping within Switzerland and safe handling.