BeaverCraft · Ghosts · Wood Carving Kit · Basswood · Ages 14+
BeaverCraft Ghosts Wood Carving Kit
Carving knife, basswood and 5 ghost patterns in one box
Getting started with whittling usually stalls at the first questions: which knife, which wood, which first project? The BeaverCraft Ghosts Wood Carving Kit answers all three at once – a carving knife, two basswood blocks, five ghost patterns, paints and a step-by-step guide are ready to go, and you need no prior experience.
Buy the BeaverCraft Ghosts Wood Carving Kit – from a basswood block to your own ghost figure
The BeaverCraft Ghosts Wood Carving Kit is a complete beginner set for carving small ghost figures from a raw block of wood and painting them afterwards. The box contains a carving knife, two basswood blocks, patterns with five ghost designs, carbon transfer paper and a pencil, three sheets of P150 sandpaper, a leather strop with polishing compound, cut-resistant tape, plus a brush and paints in white, black and orange. A printed booklet and a video tutorial walk you through every stage, so there is nothing to hunt down before you start – the kitchen table is all the workshop you need. BeaverCraft recommends the kit for ages 14 and up; younger carvers should use it under adult supervision, depending on their experience and motor skills.
Why the wood matters most at the start
Basswood – the material that makes your first cuts easy
On a first carving project, the wood makes more difference than the knife. Basswood is a classic carving timber: soft, with a fine and even grain that comes away in controlled shavings instead of catching the blade or splitting off in chunks. That is exactly what you want while you learn how wood behaves under the edge – with and against the grain, when roughing out the silhouette and when cutting small details such as eyes and mouths. Its pale surface also takes paint well, so your ghosts look clean once coloured. Prefer the natural look? Simply leave the paint aside.
Four steps from block to ghost – how the guide leads you through
The workflow is laid out so you always know what comes next. First you transfer one of the five patterns onto the basswood block using the carbon paper and pencil. Then you shape the silhouette and basic form with the carving knife, and in step three you add the small details – eyes, mouth, hat or glasses. Finally you smooth the surfaces with sandpaper if you like and paint your ghost. The printed booklet shows each stage step by step, while the video tutorial adds six essential carving cuts. Once those cuts feel natural, you can carve every design in the kit with them – and the skills carry over to every project that follows. When you are ready for new subjects, our range of carving sets offers the next step.
Sharp edge, safe hands – what comes with the knife
A carving knife only cuts cleanly when its edge is keen. That is why the BeaverCraft Ghosts Wood Carving Kit includes a leather strop with polishing compound: strop the blade every so often to keep it sharp rather than pushing harder as it dulls. This matters for safety, too – a blunt knife is more likely to slip than a sharp one. Wrap the cut-resistant tape around the thumb and fingers of the hand holding the workpiece, as shown in the manufacturer’s images. It reduces the risk of small nicks but is no substitute for care. For extra protection, we recommend adding a cut-resistant glove and a thumb guard from our carving protection range or suitable gloves. The three sheets of P150 sandpaper smooth the surface before painting.
Perfect for Halloween – five characters that stay fun long after
The designs play on the Halloween theme: ghosts with big eyes, with glasses and a moustache, with a beanie or with a wide-open mouth. Painted, they sit nicely next to pumpkins and candles in autumn decor or become a handmade gift. Yet this is not just a seasonal item. What you learn – transferring a pattern, shaping a silhouette, carving details, stropping the blade – is the foundation for any figure you carve later. Left unpainted, the ghosts work as small wooden figures on a shelf all year round, and a carving evening together is just as enjoyable in January as at the end of October. Your cuts and colour choices give each ghost its own personality, from spooky to silly.
What the BeaverCraft Ghosts Wood Carving Kit does – and what it doesn’t
The kit contains everything needed to finish your first figures from start to end. It does, however, include two blocks while the patterns show five designs – to carve more ghosts, you will need additional carving wood. BeaverCraft does not state the dimensions of the blocks or finished figures, nor the blade steel or blade length, so we do not quote any here. The knife is a genuinely sharp carving tool, not a toy: the manufacturer recommends the kit for ages 14 and up and explicitly calls for adult supervision for younger children. And the paint selection is deliberately limited to white, black and orange – for other shades, use your own craft paints.
Key features – BeaverCraft Ghosts Wood Carving Kit
- 🔪 Carving knife – fixed blade for silhouette and details
- 🪵 2 basswood blocks – soft, even-grained carving wood
- 👻 Patterns with 5 ghost designs – each with its own character
- 📝 Carbon transfer paper and pencil – to trace the pattern onto the wood
- ✨ Leather strop with polishing compound – to hone the blade
- 🩹 Cut-resistant tape – for the fingers and thumb of your holding hand
- 📄 P150 sandpaper – 3 sheets for smoothing
- 🎨 Brush and paints – white, black and orange
- 📘 Printed step-by-step booklet – from block to finished figure
- 🎬 Video tutorial – 6 essential carving cuts
- 👤 Ages 14+ – younger users only under adult supervision
Who is the BeaverCraft Ghosts Wood Carving Kit for?
The kit is aimed at anyone who wants to get into wood carving without prior knowledge and hold a finished result in their hands straight away: teenagers aged 14 and over, adults looking for a calm hobby, and families planning a creative evening together – always with supervision when younger children join in. It also makes a good gift for Halloween, a birthday or the long autumn and winter evenings. More knives, sets and accessories from the maker are on our BeaverCraft brand page. Buy the BeaverCraft Ghosts Wood Carving Kit at Swiss-Sale.ch – your Swiss specialist shop for carving tools with fast shipping.
- Product type: Carving set
Technical Specifications – BeaverCraft Ghosts Wood Carving Kit
| Model | BeaverCraft Ghosts |
|---|---|
| Brand | BeaverCraft |
| Product type | wood carving kit for beginners |
| Tools and materials | |
| Carving knife | 1 × fixed-blade carving knife |
| Wood | 2 basswood blocks |
| Patterns | 5 ghost designs |
| Transfer | carbon transfer paper · pencil |
| Sharpening | leather strop · polishing compound |
| Finger protection | cut-resistant tape |
| Sandpaper | P150 grit · 3 sheets |
| Painting | brush · paints in white, black and orange |
| Instructions and suitability | |
| Instructions | printed step-by-step booklet · video tutorial |
| Video content | 6 essential carving cuts |
| Prior experience | none required |
| Age recommendation | 14+ (manufacturer’s information) |
| Note | younger users only under adult supervision |
| Identification | |
| EAN | 0736649259041 |
| Warranty | 2 years Swiss statutory warranty |
Package Contents – BeaverCraft Ghosts Wood Carving Kit
- 🔪 Carving knife with fixed blade
- 🪵 Basswood blocks (2×)
- 👻 Carving patterns with 5 ghost designs
- ✨ Leather strop with polishing compound
- 🩹 Cut-resistant tape
- 📄 P150 sandpaper (3×)
- 📝 Carbon transfer paper for tracing the patterns
- ✏️ Pencil
- 🖌️ Brush
- 🎨 Paints in white, black and orange
- 📘 Step-by-step booklet
- 🎬 Video tutorial with 6 essential carving cuts
Frequently Asked Questions – BeaverCraft Ghosts Wood Carving Kit
Here you will find answers about the BeaverCraft Ghosts Wood Carving Kit – from what is in the box, the instructions, knife care and cut protection to suitability for children and shipping within Switzerland.