Bushnell · Reflex Sight · DeltaPoint Pro footprint
Bushnell RXS-250 Reflex Sight
4 MOA, over 50'000 h battery life and just 42 g
Iron sights make you choose between rear sight, front sight and target – with a reflex sight you simply look at the target. The Bushnell RXS-250 reflex sight mounts directly to slides with the DeltaPoint Pro footprint or to rails with the included Weaver-style mount, shows a 4 MOA dot and runs for more than 50'000 hours on a CR2032 at medium brightness.
Buy the Bushnell RXS-250 Reflex Sight – an open sight for pistol, shotgun and rifle
The Bushnell RXS-250 reflex sight is an open reflex sight with a 4 MOA dot for pistols, shotguns and rifles. Bushnell designed it for hunting, plinking and target shooting. You aim with both eyes open and concentrate only on the target – the pre-focused dot appears sharp wherever you look. The RXS-250 fits slides and mounts with the Leupold DeltaPoint Pro footprint directly, and a low-profile mount for Weaver or Picatinny rails is included. See further models from the brand among our Bushnell red dot sights.
Point-source LED · 10 brightness settings · True Tone
A bold 4 MOA dot that stays visible in bright daylight
The point-source LED of the RXS-250 produces a clean beam and therefore a clear 4 MOA dot – about 11.6 cm at 100 m, so it is quick to find. There are ten brightness settings; according to Bushnell the top two are visible even in bright daylight, and the range is also night vision compatible. At setting 5 one CR2032 lasts more than 50'000 hours. Fully multi-coated optics with True Tone coatings show colours without a blue cast, and a shielded emitter window reduces glare.
Straight onto the slide or onto the rail – DeltaPoint Pro footprint plus Weaver mount
The RXS-250 uses the widespread Leupold DeltaPoint Pro footprint, so it fits all bases and adapter plates for that pattern, for example on optics-ready pistols. For a shotgun or rifle with a Weaver or Picatinny rail, attach the included low-profile mount; its T15 Torx cross-bolt engages a rail slot. Bushnell recommends 1.7 N·m for the two sight-to-base screws and 2.8 N·m for the cross-bolt. Push sight and plate gently forward while tightening so no play remains. Keep at least 76 mm between your eye and the sight.
Two buttons, one timer – and the battery changes from the top
Press the up or down button to switch the Bushnell RXS-250 reflex sight on; each further press changes brightness by one level. To switch off, hold down for 3 seconds. By default a timer turns the sight off after 12 hours without a button press; hold both buttons for 3 seconds to disable it (three slow blinks) or re-enable it (four quick blinks). The CR2032 sits under a cover on top, opened with the flat end of the Bushnell multi-tool – the sight stays mounted. Spare cells are available in our battery shop.
Aluminium housing rated IP67 and tested to MIL-STD-810H – with a hood against glare and snagging
The housing is made of aircraft-grade aluminium, is dust-tight to IP67 and withstands 30 minutes at 1 m depth. According to Bushnell it is drop and impact tested to MIL-STD-810H. The chamfered and filleted hood reduces glare and keeps the sight from snagging on clothing or gear. Elevation and windage click in 1 MOA steps (about 2.9 cm at 100 m), with 30 MOA per revolution and 100 MOA of travel each. Parallax is set at 50 yards (about 46 m) and minimised out to 100 yards.
What the RXS-250 does – and what it does not
The RXS-250 is a non-magnifying (1x) open reflex sight with a single red 4 MOA dot; it has no laser and no alternative reticles. With battery it weighs 42 g and is 46 mm long; the low-profile mount adds about 23 g. The box contains the Weaver-style mount, a protective shroud, the CR2032, the Bushnell multi-tool, a basic adjustment tool and a Spudz cleaning cloth. An adapter plate for a specific pistol slide, spare batteries, a torque wrench and the firearm are not included.
Key features – Bushnell RXS-250 Reflex Sight
- 🔴 4 MOA red dot – point-source LED, 1x, 24 mm objective
- 🔋 Over 50'000 h – CR2032 at setting 5, top battery cover
- 🔆 10 brightness settings – top two visible in daylight
- ⏱️ 12-hour auto-off – can be disabled
- 🔧 DeltaPoint Pro footprint – plus low-profile Weaver/Picatinny mount
- 🎯 1 MOA per click – 30 MOA per turn, 100 MOA travel each
- 👁️ Unlimited eye relief – parallax free at 50 yards (approx. 46 m)
- 💧 IP67 – 30 min at 1 m, MIL-STD-810H drop tested
- 🛡️ Aluminium housing – True Tone coatings, shielded emitter window
- ⚖️ 42 g with battery – 46 mm long, mount approx. 23 g
Who is the Bushnell RXS-250 for?
For shooters who want a light, open reflex sight they can use on several firearms: sport shooters with optics-ready pistols, shotgun shooters, hunters at short range and recreational shooters out plinking. More optics from the manufacturer are on our Bushnell brand page. Buy the Bushnell RXS-250 reflex sight at Swiss-Sale.ch – your Swiss specialist shop for reflex sights and sighting optics with fast shipping.
Technical Specifications – Bushnell RXS-250 Reflex Sight
| Model | Bushnell RXS-250 Reflex Sight |
|---|---|
| Product type | Reflex sight, open |
| Magnification × objective | 1 × 24 mm |
| Reticle | 4 MOA dot (point-source LED) |
| Reticle colour | Red |
| Brightness settings | 10 (top 2 daylight-bright, night vision compatible) |
| Controls | Up/down push buttons on the side |
| Auto-off | 12 h without button press, can be disabled |
| Adjustment per click | 1 MOA, detented |
| Adjustment per revolution | 30 MOA |
| Adjustment range | 100 MOA elevation · 100 MOA windage |
| Parallax free at | 50 yd (approx. 46 m), minimised to 100 yd |
| Eye relief | Unlimited |
| Lens coating | Fully multi-coated, True Tone |
| Battery | 1 × CR2032, top battery cover |
| Runtime (max.) | over 50'000 h (brightness setting 5) |
| Protection rating | IP67 (1 m / 30 min, dust-tight) |
| Durability | Drop and impact tested to MIL-STD-810H |
| Footprint | Leupold DeltaPoint Pro |
| Mount | Low-profile Weaver-style mount for Weaver and Picatinny rails (included), T15 Torx cross-bolt |
| Housing material | Aircraft-grade aluminium |
| Length | 46 mm |
| Weight | 42 g with battery, without mount · mount approx. 23 g |
| EAN | 029757007193 |
| Manufacturer part no. | RXS250 |
| Warranty | 2-year warranty |
Package Contents – Bushnell RXS-250 Reflex Sight
- 🔴 Bushnell RXS-250 reflex sight
- 🔧 Low-profile Weaver-style mount for Weaver and Picatinny rails
- 🛡️ Protective shroud for the sight
- 🔋 CR2032 battery (packed separately or installed with protective disc)
- 🪛 Bushnell multi-tool
- 🗝️ Adjustment tool
- 🧽 Spudz cleaning cloth
Not included: adapter plate for a specific pistol slide, spare battery, torque wrench, firearm.
Frequently Asked Questions – Bushnell RXS-250 Reflex Sight
Answers about the Bushnell RXS-250 – from dot, brightness and battery to the DeltaPoint Pro footprint, the Weaver mount and shipping within Switzerland.
What reticle does the Bushnell RXS-250 have?
How big and how heavy is the Bushnell RXS-250?
What is the Bushnell RXS-250 suitable for?
Which pistols and mounts does the Bushnell RXS-250 fit?
How long does the battery last in the Bushnell RXS-250?
How do I look after the Bushnell RXS-250?
How do I operate the Bushnell RXS-250 and its timer?
How do I zero the Bushnell RXS-250?
What warranty applies to the Bushnell RXS-250?
How fast does Swiss-Sale.ch ship the Bushnell RXS-250?
Why buy the Bushnell RXS-250 from Swiss-Sale.ch?
What should I keep in mind when mounting and using the Bushnell RXS-250?
Official Bushnell user manual for the RXS-250: mounting, operation and care. Language: English.
Bushnell RXS-250 – user manual (PDF)
Official Bushnell video about the RXS-250.