Katadyn · maintenance kit · Hiker Pro · Set 1
Katadyn Hiker Pro Maintenance Kit Set 1
protection for the filter element
The Hiker Pro element cannot be brushed clean like ceramic. All the more, prefiltration decides how long it lasts – and that is exactly what this set renews.
Buy the Katadyn Hiker Pro maintenance kit – prefilter protection and seal in one set
The Katadyn Hiker Pro maintenance kit Set 1 contains the four parts that are regularly renewed on the Hiker Pro: the filter guard, the mesh fabric for prefiltration, the filter element O-ring and a tube of silicone grease. Unlike ceramic filters, this is not about pump seals but about protecting the filter element itself. The Hiker Pro’s glass fibre element cannot be cleaned – every bit of suspended solids it takes on shortens its service life irreversibly.
The only lever on service life
Why prefiltration decides everything on the Hiker Pro
With a ceramic filter you can brush the surface and restore flow again and again – the Hiker Pro’s pleated glass fibre element does not allow that. Whatever settles in its pleats stays there. AntiClog technology delays clogging considerably, but it cannot undo coarse particles already lodged in the element. Prefiltration is therefore the only real lever you have on service life: a clean filter guard and intact mesh hold back sand, algae and suspended solids before they reach the expensive element. Replacing a worn or clogged mesh costs a fraction of a new filter element.
Filter guard and mesh – two stages ahead of the element
The filter guard is the robust part that keeps out coarse matter such as leaves, gravel and larger particles; the mesh fabric filters more finely and catches sand, algal fibres and suspended solids. Both are wear parts in the literal sense: the mesh chafes through on stones and branches, it tears with careless handling, and in heavily turbid water it clogs without washing out completely. A damaged mesh lets raw water past the prefilter to the element unfiltered – and you only notice by the rapidly declining flow.
The O-ring: small but safety-relevant
The O-ring at the filter element ensures that all water actually passes through the filter medium. If it has aged, twisted or been damaged, a bypass forms: part of the raw water goes around the element and lands unfiltered on the clean-water side. The filter then delivers particularly easily – a state that feels like a well-functioning unit but offers no microbiological safety. That is why the O-ring is among the parts renewed as a precaution with every element change.
In practice: prefiltering saves money and pumping effort
If you filter water from turbid or algae-rich sources, do not let the raw water hose hang near the bottom or in stirred-up sediment – the float keeps the intake point in clearer water. If the water can settle in a container first, even less suspended matter reaches the element. Combined with an intact mesh, this considerably extends the filter element’s service life while keeping pump resistance low.
Key features – Katadyn Hiker Pro Maintenance Kit Set 1
- 🧰 4 parts for regular servicing
- 🛡️ Filter guard against coarse particles
- 🕸️ Mesh fabric for prefiltration
- ⭕ Filter element O-ring against bypass
- 🧴 Tube of silicone grease – do not use mineral-oil grease
- ⏳ Extends the service life of the filter element
- 🚫 The filter element itself is not included
- 🖐️ Not included: pump plunger and grip sleeve (that is Set 2)
- 🎯 For the Katadyn Hiker Pro water filter
- 🇨🇭 Katadyn · Swiss water treatment since 1928
Set 1, Set 2 or filter element – the short guide
The Hiker Pro has three wear items, and they solve different problems. This maintenance kit (Set 1) with filter guard, mesh, O-ring and silicone grease protects the filter element and is renewed as routine. The pump plunger set (Set 2) replaces the pump mechanism when the plunger becomes stiff or the grip sleeve is damaged. The replacement filter element, finally, is due when flow declines permanently despite a clean prefilter – at up to 1'150 litres the element is a consumable and cannot be cleaned. Buy the Katadyn Hiker Pro maintenance kit at Swiss-Sale.ch – your Swiss specialist shop for outdoor gear with fast shipping.
Who is the Katadyn Hiker Pro maintenance kit for?
The set is for every Katadyn Hiker Pro owner – particularly those who often filter from turbid sources, lakes or rivers carrying sediment and want to get the maximum out of their filter element’s service life.
Technical Specifications – Katadyn Hiker Pro Maintenance Kit Set 1
| Model | Katadyn Hiker Pro Maintenance Kit Set 1 |
|---|---|
| Brand | Katadyn |
| Product type | Maintenance kit (spare and wear parts) |
| Contents | |
| Number of parts | 4 parts |
| Filter element O-ring | 1 piece |
| Filter guard | 1 piece |
| Mesh fabric | 1 piece |
| Silicone grease | 1 tube |
| Function | |
| Filter guard role | Keeps coarse particles off the filter element |
| Mesh fabric role | Prefiltration of sand, algae and suspended solids |
| O-ring role | Prevents bypass at the filter element |
| Application & identification | |
| Fits | Katadyn Hiker Pro water filter |
| Not included | Filter element · pump plunger set (Set 2) |
| Manufacturer part no. | 8019984 |
| EAN | 7612013199843 |
| Warranty | 2 years Swiss statutory warranty |
Package Contents – Katadyn Hiker Pro Maintenance Kit Set 1
- ⭕ Filter element O-ring
- 🛡️ Filter guard
- 🕸️ Mesh fabric for prefiltration
- 🧴 Silicone grease 1 tube
Frequently Asked Questions – Katadyn Hiker Pro Maintenance Kit Set 1
Answers around the Katadyn Hiker Pro maintenance kit Set 1 – from contents and prefilter effect to how it differs from Set 2 and Swiss shipping.
