Free shipping from CHF 100
Quality for over 20 years
Personal consultation
Sightmark XTM-3 Magnifier 3x | Flip-to-Side LQD Mount | 230 g
  • 🔍 3× magnification – for red dot and reflex sights, 18 mm objective
  • ↔️ Flip-to-side – swings aside, snaps into both positions
  • 🔒 LQD mount – Picatinny, locking, adjustable to the rail
  • 📐 6.8° field of view – 11.9 m at 100 m
  • 👁️ 59 mm eye relief – 5.6 mm exit pupil
  • 🎚️ ±2 dioptre adjustment – rotating eyepiece
  • 🎯 Reticle centring – hand-adjustable windage and elevation, zero unaffected
  • 💧 IPX7 – 1 m for 1 h, nitrogen filled and fog proof
  • 🛡️ 6061 aluminium – shockproof, rated up to .338 calibre
  • ⚖️ 230 g with mount – 69 × 55 × 68 mm
  • 🏅 2-year warranty – handled by Swiss-Sale.ch in Switzerland

319.00 CHF
incl. 8,1% VAT , Free shipping (Paket)
Available immediately
Deliverydate: 18.11.2026 - 20.11.2026
pcs
Description

Sightmark · Magnifier · 3×

Sightmark XTM-3 Magnifier 3x
Triple magnification for your red dot – flips to the side, weighs just 230 g

A red dot gets you on close targets fast, but at medium range you lose detail. Mount the Sightmark XTM-3 Magnifier 3x behind your sight and the picture is magnified three times – when you need a clear view again, one movement flips it to the side. The LQD mount holds it securely on the Picatinny rail.

🔍
3× magnification
18 mm objective
↔️
Flip-to-side
snaps into place
🔒
LQD mount
locking, Picatinny
👁️
59 mm
eye relief
🎚️
±2 dioptres
rotating eyepiece
📐
11.9 m at 100 m
6.8° field of view
💧
IPX7
nitrogen filled
⚖️
230 g
including mount
🏅
2-year warranty
handled in Switzerland

Buy the Sightmark XTM-3 Magnifier – extra reach for your red dot sight

The Sightmark XTM-3 Magnifier 3x mounts on the Picatinny rail behind a red dot or reflex sight. It has no reticle of its own; instead it magnifies the image of your sight three times so you can identify targets better at medium range. According to Sightmark it works with most red dot and reflex sights, and the brand also offers it in sets with the Sightmark Ultra Shot M-Spec LQD and the Sightmark Volta Solar. At 69 mm long and 230 g including the mount, it adds little bulk to your firearm.

Flip-to-side · LQD · 3×

Flip it aside – from 1× to 3× and back in one movement

Push or pull the body of the XTM-3 to the side until it snaps into place. You are then looking only through your red dot, unmagnified and with the full field of view. The same movement in the opposite direction swings it back to the centre, where it locks in again. The mechanism is designed so the magnifier snaps into its end position with minimal movement. Your sight stays mounted as it is – the point of impact depends only on the red dot.

↔️ Flip-to-side
🔍 3× magnification
🔒 LQD locking

LQD mount – quick on and off, secured against accidental release

The integrated Picatinny mount uses Sightmark's Locking Quick Detach (LQD) system. Press the front of the LQD lock, flip the lever open, place the magnifier on the rail with the eyepiece facing you and close the lever until it locks. The lock prevents the magnifier from coming off unintentionally. If the mount is too tight or too loose, adjust it to your rail with the LQD adjustment; the tool is included. Sightmark recommends mounting the magnifier as far back as possible without obstructing the firearm's charging handle.

Eyepiece with dioptre adjustment and reticle centring – a sharp picture with the dot in the middle

Turn the eyepiece until the image is sharp for your eye – the adjustment covers −2 to +2 dioptres. If your sight's dot does not appear centred in the magnifier, use the XTM-3's hand-adjustable windage and elevation to bring it back to the middle; this does not change the point of impact. The fully multi-coated glass lenses give a 6.8° field of view, or 11.9 m at 100 m, with a 5.6 mm exit pupil and 59 mm of eye relief.

IPX7 waterproof and fog proof – ready for rain and temperature changes

The 6061 aluminium housing is matte black anodised, shockproof and rated by Sightmark up to .338 calibre. It is nitrogen filled, so it stays fog-free inside, and waterproof to IPX7 – 1 m deep for one hour. The operating temperature range is −20 to +60 °C.

What the XTM-3 does – and what it doesn't

The XTM-3 is an optical magnifier with no illumination and no reticle. It only works together with a red dot or reflex sight, which you need separately, and it needs no batteries. The box contains the magnifier with LQD flip-to-side mount, an adjustment tool and the manual. Another 3× magnifier from the brand is the Sightmark T-3; you will find matching sights in our red dot sights category.

Key features – Sightmark XTM-3 Magnifier 3x

  • 🔍 3× magnification – 18 mm objective, 30 mm eyepiece, 5.6 mm exit pupil
  • 📐 6.8° field of view – 11.9 m at 100 m
  • 👁️ 59 mm eye relief – ±2 dioptre adjustment
  • ↔️ Flip-to-side – snaps into place in both positions
  • 🔒 LQD mount – Picatinny, locking, adjustable to the rail
  • 🎯 Reticle centring – hand-adjustable windage and elevation, no effect on point of impact
  • 💎 Fully multi-coated glass – FMC
  • 💧 IPX7 – 1 m for 1 h, nitrogen filled and fog proof
  • 🛡️ 6061 aluminium – shockproof, rated up to .338 calibre
  • ⚖️ 230 g with mount – 69 × 55 × 68 mm, matte black anodised

Who is the Sightmark XTM-3 for?

For anyone who wants to extend their red dot or reflex sight to medium range: sport shooters switching between near and far targets, hunters who want to identify game more precisely at medium distance, and owners of long guns with a Picatinny rail looking for a light, compact magnifier. Buy the Sightmark XTM-3 Magnifier at Swiss-Sale.ch – your Swiss specialist shop for sighting optics with fast shipping.

🎯Sport shooters
🦌Medium-range hunting
🔴Red dot users
🔫Long guns with Picatinny
⚖️Light gear
🌧️Any weather
Technical Specifications

Technical Specifications – Sightmark XTM-3 Magnifier 3x

ModelSightmark XTM-3
Product typeMagnifier for red dot and reflex sights
ColourMatte black, anodised
Optics
Magnification3×
Objective diameter18 mm
Eyepiece diameter30 mm
Exit pupil5.6 mm
Eye relief59 mm
Field of view6.8° · 11.9 m at 100 m
Dioptre adjustment−2 to +2 dpt
LensesGlass, fully multi-coated (FMC)
Reticle centringWindage and elevation, hand adjustable
Mount and housing
MountPicatinny, integrated LQD mount (Locking Quick Detach) with flip-to-side
Material6061 aluminium
Recoil ratingUp to .338 calibre
Protection ratingIPX7 (1 m, 1 h)
Nitrogen filled / fog proofYes / yes
ShockproofYes
Dimensions (L × W × H)69 × 55 × 68 mm
Weight230 g (with mount)
Operating temperature−20 to +60 °C
Power supplyNone (purely optical)
Identification
Manufacturer part no.SM19065
EAN840284900326
Warranty2-year warranty
Package Contents

Package Contents – Sightmark XTM-3 Magnifier 3x

  • 🔍 Sightmark XTM-3 magnifier 3x with LQD flip-to-side mount (Picatinny)
  • 🔧 Adjustment tool
  • 📄 User manual

Not included: red dot or reflex sight, firearm with Picatinny rail.

Frequently Asked Questions

Frequently Asked Questions – Sightmark XTM-3 Magnifier 3x

Here you will find answers about the Sightmark XTM-3 – from optics and flip-to-side to the LQD mount, compatible sights and shipping within Switzerland.

What are the optical specifications of the Sightmark XTM-3?
The XTM-3 magnifies three times and has an 18 mm objective, a 30 mm eyepiece and a 5.6 mm exit pupil. The field of view is 6.8°, or 11.9 m at 100 m, and eye relief is 59 mm. The glass lenses are fully multi-coated.
How big and how heavy is the Sightmark XTM-3?
The XTM-3 measures 69 × 55 × 68 mm and weighs 230 g including the mount.
Which sights does the Sightmark XTM-3 work with?
According to Sightmark, the XTM-3 works with most red dot and reflex sights on a Picatinny rail. Sightmark itself sells it in sets with the Ultra Shot M-Spec LQD and the Volta Solar. Make sure there is enough rail space behind your sight for the mount.
What makes the Sightmark XTM-3 special?
The XTM-3 combines a compact 69 mm, 230 g build with a flip-to-side mechanism that snaps into place in both positions and a locking LQD mount. It adds dioptre adjustment, hand-adjustable reticle centring and a nitrogen-filled housing that is waterproof to IPX7.
How does the Sightmark XTM-3 differ from a riflescope?
A riflescope has its own reticle and must be zeroed. The XTM-3 has no reticle – it only magnifies the image of your red dot sight. Flip it aside and you shoot unmagnified again, with the same point of impact, because that depends only on your sight.
How do I clean and store the Sightmark XTM-3?
Wipe the housing with a dry or slightly damp cloth, blow dust off the lenses and clean them with a lens cloth; a little denatured alcohol helps with oil or water spots. To keep the flip mechanism moving smoothly, treat the pivot with a dry lubricant, not oil. Store the magnifier in a cool, dry and well-ventilated place.
How do I adjust the Sightmark XTM-3?
Turn the eyepiece until the image is sharp – ideally with your red dot sight mounted. If the dot is not centred, move it with the windage and elevation knobs: turning elevation counter-clockwise raises the dot, turning windage counter-clockwise moves it to the right. This does not change the point of impact.
How do I mount the Sightmark XTM-3?
Press the front of the LQD lock, flip the lever open, place the XTM-3 on the Picatinny rail with the eyepiece facing you and close the lever until it locks. Mount it as far back as possible without obstructing the charging handle, and check the eye relief. If the mount is too tight or too loose, adjust it with the LQD adjustment and the supplied tool.
What warranty applies to the Sightmark XTM-3?
At Swiss-Sale.ch you get a 2-year warranty. Warranty claims are handled by Swiss-Sale.ch in Switzerland – you do not need to send anything abroad.
How fast does Swiss-Sale.ch deliver the Sightmark XTM-3?
Orders placed by 5 pm are usually dispatched on the same working day. We normally ship with Swiss Post, and delivery within Switzerland takes 1–2 working days. Orders from CHF 100 ship free of charge, carefully packed and with tracking wherever possible.
Why buy the Sightmark XTM-3 at Swiss-Sale.ch?
Swiss-Sale.ch is an official Swiss dealer for Sightmark. You receive the magnifier shipped from Switzerland with no customs fees, and warranty claims are handled by us in Switzerland. If you have questions about pairing it with your sight, we are happy to advise you personally.
What should I keep in mind when mounting and using the Sightmark XTM-3?
Only mount, remove or adjust the XTM-3 on an unloaded firearm, and always treat the firearm as loaded. Never look at the sun through the magnifier – it can seriously damage your eyes. Zero your sight on a shooting range. For hunting, the Swiss federal hunting law and the cantonal regulations apply – check with the cantonal hunting authority before use. As a purely optical magnifier without laser and without night vision function, the XTM-3 is not one of the laser and night vision aiming devices that Swiss weapons law regulates as weapon accessories.
Reviews

Write the first review for this item and help others make a purchase decision!:

Loading ...